Headless VNC to Raspberry Pi got extreme small desktop window

When the first time you connect your Pi through VNC, anything works fine. However, when you think it’s time to unplug the HDMI and run it only through VNC, things start to go south.

It’s okay… until you it restarts.

Headless

That is, when you run a server or the Pi without a monitor connected. It is the so-called ‘Headless’. However, if the Pi starts in this mode, it can not find any working monitor, then it will have no resolution parameter generated. Then you will find yourself working with a default, small like an apple watch screen VNC desktop window. And you have no idea to drag it larger.

Headless Resolution

So, unfortunately, you have to plug your mouse and HDMI back to the Pi again. Then go to the Raspberry Pi Configuration. On the Display tab, you will find the Headless Resolution setting. Give it a good resolution instead of the default smallest one.

Change headless VNC screen resolution

Now you are safe to unplug the HDMI and mouse to restart.

Of course you can use ssh to do the same thing through raspi-config .


Ref

https://help.realvnc.com/hc/en-us/articles/360002249917-VNC-Connect-and-Raspberry-Pi#troubleshooting-vnc-server-0-11

本文由 落格博客 原创撰写:落格博客 » Headless VNC to Raspberry Pi got extreme small desktop window

转载请保留出处和原文链接:https://www.logcg.com/archives/3812.html

About the Author

R0uter

如非声明,本人所著文章均为原创手打,转载请注明本页面链接和我的名字。

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注